Canoga-perkins 9140 Four-Port SNMP Managed Fast Ethernet Switch Manuale Utente Pagina 32

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 99
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 31
3-6
3.2.3 100BASE-FX Single Mode Module
This is a plug-in module, which contains the 100BASE-FX Single Mode interface Figure 3-6.
The interface components are the following:
SC/ST connector
Port LEDs
Tx Transmit (Green)
Lnk Link (Green)
Col Collision (Yellow)
Fdx Half/Full-Duplex (Green)
Rx Receive (Green)
Rmtf Remote fault indication (Red) [Managed Units Only]
Par Partition/Disable (Red)
Llf Link Loss Forwarding/Enabled (Green) (Disabled on 9140)
Connectors: Edge connector to the main board unit
Figure
3-6. 100BASE FX Single Mode Module.
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted
Vedere la pagina 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 98 99

Commenti su questo manuale

Nessun commento